APC SRT8KXLI - Smart-UPS SRT 8000VA 230VProduct SKU: SRT8KXLI
- Regular price
- RRP £5,343.78
- Sale price
- £4,125.00 (excl. VAT)
- Sale price
- £4,950.00 (incl. VAT)
Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy-to-use navigation keys. Many different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.
LCD graphics display
Text and mimic diagrams that display modes of operation,system parameters and alarms.
10/100 BaseT сonnection
Connect the device to a network using a 10 or 100 BaseT connection.
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance.
Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Allows additional run time to be quickly added as needed.
Intelligent battery management
Maximizes battery performance,life,and reliability through intelligent,precision charging.
Ensures clean,uninterrupted power to protected equipment while batteries are being replaced
Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.
Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.
Provides remote power management of the UPS over the network.
InfraStruXure Manager сompatible
Enables centralized management via the APC InfraStruXure Manager.
Customize UPS capabilities with management cards.
LED status indicators
Quickly understand unit and power status with visual indicators.
Provides management of the UPS via a serial port.
Plug-and-Play external batteries
Ensures clean,uninterrupted power to the loads when adding extra runtime to the UPS.
Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Flash upgradeable firmware
Install maintenance releases of firmware remotely using FTP.
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).
Periodic battery self-test ensures early detection of a battery that needs to be replaced.
Predicitive failure notification
Provides early-warning fault analysis ensuring proactive component replacement.
Disconnected battery notification
Warns when a battery is not available to provide backup power.
Provides notification of changing utility power and UPS power conditions.
Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Protects connected loads from surges,spikes,lightning,and other power disturbances.
Input power factor correction
Minimizes installation costs by enabling the use of smaller generators and cabling.
Ensures clean,uninterrupted power to protected equipment when generator power is used.
Provides temporary battery power when the utility power is out.
Resettable circuit breaker
Easy recovery from overloads;no need to replace a fuse.
|Device Type||UPS - rack-mountable|
|Height (Rack Units)||6U|
|Input Voltage||AC 230 V|
|Frequency Provided||50/60 Hz|
|Frequency Required||45 - 65 Hz|
|Input Connectors||Hardwire 5-wire (3PH + N + G),hardwire 3-wire (1PH + N + G)|
|Power Output Connectors Details||6 x power IEC 60320 C13
4 x power IEC 60320 C19
1 x hardwire 3-wire (HN + G)
3 x IEC connector
|Output Voltage||AC 230 V ± 3% - 50/60 Hz|
|Power Capacity||8000 Watt / 8000 VA|
|Surge Energy Rating||480 Joules|
|Run Time (Up To)||5.3 min at full load
14.8 min at half load
|Recharge Time||3 hours|
|Remote Management Interface||Ethernet 10/100,USB|
|Expansion / Connectivity|
|Interfaces||1 x management (Ethernet) - RJ-45
1 x management (USB) - 4 pin USB Type B
1 x EPO (emergency power off)
1 x serial - RJ-45
|Expansion Slots||1 (total) / 1 (free) x SmartSlot|
|Features||Audible alarm,LCD display|
|Compliant Standards||C-Tick,VDE,IEC 60950,EN 50091-2,RoHS,EN 50091-1,REACH,EN 62040-2,IP20,EAC|
|Service &Support||Limited warranty - 3 years
Limited warranty - batteries - 2 years
|Min Operating Temperature||0 °C|
|Max Operating Temperature||40 °C|
|Humidity Range Operating||0 - 95% (non-condensing)|
|Sound Emission||55 dBA|
|Dimensions &Weight (Shipping)|
|Shipping Width||60 cm|
|Shipping Depth||1 m|
|Shipping Height||46.1 cm|
|Shipping Weight||130 kg|
If you require additional items for your order including cables, modules and other accessories for your products, we are able to provide them. Simply call us on 0114 400 0038 so we can specify exactly what you need and add them to your order.
Shipping costs are calculated based on the total weight of your order. You will see the cost of shipping your order at the checkout. All orders are processed and shipped efficiently and next day delivery is often achieved. We aim to deliver all orders within 2 working days. Feel free to call us to check the likely delivery time of your order.
If you wish to return a product, please contact us in the first instance. To be eligible for a return, your item must be unused and in the same condition that you received it. It must also be in the original packaging.
Products that are completely unopened can be returned without charge. If you have opened the packaging and box, you may be subject to a restocking fee.
If you would like more information on our shipping and returns policy, please call us on 0114 400 0038.
- choosing a selection results in a full page refresh