APC SRTG6KXLI – 6kVA/6 kW On-Line SRTG Series 4U UPS Tower UPS

£3,513.43 Ex. VAT

In stock

Description

APC SRTG6KXLI. UPS topology: Double-conversion (Online), Output power capacity: 6 kVA, Output power: 6000 W. AC outlet types: C13 coupler, C19 coupler, AC outlets quantity: 3 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery voltage: 96 V, Battery life (max): 5 year(s). Form factor: Compact, Product colour: , Display type: LCD. Width: 440 mm, Depth: 620 mm, Height: 178 mm

Automatic restart of loads after UPS shutdown

Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test

Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification

Provides early-warning fault analysis on batteries enabling timely preventive maintenance

ECO Mode

Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection

LCD Status Display

Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.

Cold-start capable

Provides temporary battery power when the utility power is out.

Safety-agency approved

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Resettable circuit breaker

Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)

Power conditioning

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Input Power Factor Correction

Minimizes installation costs by enabling the use of smaller generators and cabling.

Generator compatible

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Frequency and voltage regulation

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

SmartSlot

Customize UPS capabilities with management cards.

Network manageable

Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.

Serial connectivity

Provides management of the UPS via a serial port.

InfraStruXure Manager Compatible

Enables centralized management via the APC InfraStruXure Manager.

LED status indicators

Quickly understand unit and power status with visual indicators.

Additional information

Weight 3 kg
Form factor

Compact

Product Condition

Ethernet LAN (RJ-45) ports

1

Package weight

59 kg

Weight

51.9 kg

Emergency Power Off (EPO)

Yes

Battery technology

Sealed Lead Acid (VRLA)

Battery recharge time

4 h

Surge energy rating

600 J

Output power capacity

6 kVA

Hot-swap battery

Yes

Operating altitude

0 – 2011 m

Storage relative humidity (H-H)

0 – 95%

Operating relative humidity (H-H)

0 – 95%

Operating temperature (T-T)

0 – 40 °C

Storage temperature (T-T)

-15 – 45 °C

Non-operating altitude

0 – 15240 m

Noise level

55 dB

Certification

CE, EN/IEC 62040-1

LED indicators

Yes

Audible alarm(s)

Yes

Output power

6000 W

Output voltage Total Harmonic Distortion (THD)

2%

Depth

620 mm

Height

178 mm

Width

440 mm

AC outlets quantity

3 AC outlet(s)

AC outlet types

C13 coupler, C19 coupler

Crest factor

3:1

Cold start

Yes

Automatic battery test

Yes

Output operation voltage (min)

220 V

Output operation voltage (max)

240 V

Input operation voltage (max)

285 V

Input operation voltage (min)

100 V

Waveform

Sine

Battery voltage

96 V

Package width

590 mm

Package depth

790 mm

Package height

275 mm

International Protection (IP) code

IP20

UPS topology

Double-conversion (Online)

Output frequency

50/60 Hz

Emergency Power Off (EPO) connector

Yes

Serial interface

Yes

USB port

Yes

SmartSlot

Yes

Battery life (max)

5 year(s)

Audible alarm modes

Alarm when on battery, Low battery alarm, Overload alarm

ECO mode

Yes

Input frequency

40/70 Hz

Display type

LCD