APC SMT3000RMIC | Smart-UPS 3000VA | Rackmount | Network Connectivity | 2700W 9 AC outlets

£1,735.09 Ex VAT

2.7 kW, 3 k VA, 50/60Hz, 200 V, 6ms, RJ-45 Serial, SmartSlot, USB, 320 Joules

In stock

SKU: SMT3000RMI2UC Categories: , , , Brand:

Description

APC SMT3000RMI2UC. UPS topology: Line-Interactive, Output power capacity: 3 kVA, Output power: 2700 W. AC outlet types: C13 coupler, C19 coupler, Power plug: C20 coupler, AC outlets quantity: 9 AC outlet(s). Battery technology: Sealed Lead Acid (VRLA), Battery capacity: 547 VAh, Typical backup time at full load: 3.2 min. Form factor: Rackmount, Product colour: , Rack capacity: 2U. Width: 480 mm, Depth: 683 mm, Height: 86 mm

Adjustable voltage sensitivity
Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Adjustable voltage-transfer points
Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Audible alarms
Provides notification of changing utility power and UPS power conditions

Automatic restart of loads after UPS shutdown
Automatically starts up the connected equipment upon the return of utility power.

Automatic self-test
Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Battery failure notification
Provides early-warning fault analysis on batteries enabling timely preventive maintenance

Boost and Trim Automatic Voltage Regulation (AVR)
Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).

Cold-start capable
Provides temporary battery power when the utility power is out.

Disconnected battery notification
Warns when a battery is not available to provide backup power.

Energy meter
Provides actual kilowatt hours of usage for energy conscious users.

Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Green mode
Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

High online efficiency
Reduces utility costs, generates less heat.

Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced

Intelligent battery management
Maximizes battery performance, life, and reliability through intelligent, precision charging.

Intuitive LCD interface
Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.

LED Indicators
Provide easy-to-read status of the unit and utility power conditions.

Network manageable
Provides remote power management of the UPS over the network.

Outlet group control
Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).

Predictive failure notification.
Provides early-warning fault analysis ensuring proactive component replacement.

Predictive replace battery date
Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.

Pure sine wave output on battery
Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.

Safety-agency approved
Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Sequenced network shutdown and reboot
Customize network shutdown and reboot sequence of connected servers and UPSs.

Serial connectivity
Provides management of the UPS via a serial port.

Single switched outlet group
Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.

SmartConnect
Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.

StruxureWare Data Center Expert compatible
Enables centralized management via StruxureWare Data Center Expert.

Temperature-compensated battery charging
Prolongs battery life by regulating the charge voltage according to battery temperature.

USB connectivity
Provides management of the UPS via a USB port (not available on all models).

User-replaceable batteries
Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)

Wide input voltage range
Designed for harsh electrical environments to save battery life.

Additional information

Weight 54850 kg
Cable length

2 m

Typical backup time at full load

3.2 min

Form factor

Rackmount

Typical backup time at half load

11.5 min

Ethernet LAN (RJ-45) ports

1

Package weight

51.7 kg

Weight

44.3 kg

Nominal output voltage

230 V

Battery technology

Sealed Lead Acid (VRLA)

Battery recharge time

3 h

Number of output IEC jumpers

3

Nominal input voltage

230 V

Surge energy rating

320 J

Output power capacity

3 kVA

Hot-swap battery

Yes

Operating altitude

0 – 3000 m

Storage relative humidity (H-H)

0 – 95%

Operating relative humidity (H-H)

0 – 95%

Operating temperature (T-T)

0 – 40 °C

Storage temperature (T-T)

-15 – 45 °C

Non-operating altitude

0 – 15000 m

Product colour

Black

Noise level

55 dB

Certification

CE, EAC, EN 60950, EN/IEC 62040-1, EN/IEC 62040-2, GS Mark, IRAM, RCM, VDE, WEEE, REACH, PEP, EOLI

LED indicators

Status

Audible alarm(s)

Yes

Bundled software

Powershute Business Edition

Output power

2700 W

Depth

683 mm

Height

86 mm

Width

480 mm

Efficiency

98.9%

Power plug

C20 coupler

AC outlets quantity

9 AC outlet(s)

AC outlet types

C13 coupler, C19 coupler

Cold start

Yes

Automatic battery test

Yes

Output operation voltage (min)

220 V

Output operation voltage (max)

240 V

Input operation voltage (max)

302 V

Input operation voltage (min)

151 V

Waveform

Sine

Auto-restart

Yes

Automatic Voltage Regulation (AVR)

Yes

Package width

600 mm

Package depth

980 mm

Package height

254 mm

UPS topology

Line-Interactive

Quick installation guide

Yes

Cables included

RS-232, USB cable

Rack mount kit

Yes

Serial interface

Yes

USB port

Yes

Serial interface type

RJ-45

SmartSlot

Yes

Software CD

Yes

Battery life (max)

5 year(s)

Battery capacity

547 VAh

Hold time (max)

8 ms

Hold time (min)

4 ms

Rack capacity

2U

Input frequency

50/60 Hz

Sustainability certificates

Green Premium, RoHS

Display type

LCD

Harmonized System (HS) code

85078000